Clipper® SC delivers fast and selective control of tough invasive and nuisance plants such as cabomba, watermeal, Eurasian watermilfoil, water lettuce, duckweed, giant salvinia and more. Plus, Clipper SC dissipates quickly from the water column and does not accumulate in sediment. With 4 lb of flumioxazin per gallon, Clipper SC offers easier handling and mixing.
CLIPPER DELIVERS UNBEATABLE AQUATIC WEED CONTROL
Convenient liquid formulation improving ease of application, transport, and handling – 1 liquid fl oz Clipper SC = 1 dry oz Clipper WDG
Fast and selective control of tough invasive and nuisance plants
Dissipates quickly from the water column and does not accumulate in sediment, giving it a favorable environmental profile
Easy mixing, handling, and measuring
Improved efficacy with less pH sensitivity
Clipper® SC is a contact herbicide that quickly degrades in water. Good coverage and contact time is essential. Make applications with sufficient volume of water according to the label. When making applications to floating or emergent weeds, apply at 6 to 12 fl oz per acre and mix with an adjuvant approved for aquatic sites. For subsurface applications, apply Clipper SC at 200 to 400 ppb in the water column. Please see label for information on the effects of high pH on plant response and efficacy.
CLIPPER® SC BLOOMS AND MIXES EASILY AND STAYS IN SUSPENSION
Unlike WDG formulations, liquid Clipper SC blooms quickly and mixes easily. With only slight agitation, Clipper SC mixes evenly and completely. Plus, it stays in suspension longer – even after two hours without agitation Clipper SC shows no signs of settling.
PRECAUTIONS AND RESTRICTIONS
No restrictions for swimming, drinking, or fishing.
DO NOT apply to intertidal or estuarine areas.
In areas with dense weed vegetation only treat 1/2 the water body at one time and wait 10-14 days before treating the remaining area. DO NOT re-treat the same section of water within 28 days of application.
Treated water may not be used for irrigation purposes on food crops until at least five days after application.
Treated water may be used for irrigation purposes on turf and landscape ornamentals as outlined in the Irrigation Restrictions Following Application table below.
DO NOT use in water utilized for crawfish farming.
DO NOT re-treat the same section of water with Clipper SC more than 6 times per year.
DO NOT exceed 400 ppb of Clipper SC during any one application.
IRRIGATION RESTRICTIONS FOLLOWING APPLICATION
See label for complete application rates and recommendations.
FAST AND SELECTIVE CONTROL OF TOUGH, INVASIVE AND NUISANCE PLANTS
Trial Work, M. Belland, Aquatic Control Technology, 2012 Application Date: May 17, 2012
Pond Location: Northwest Connecticut Target Plants: Curlyleaf pondweed (submersed) and filamentous, green algae (floating)
EPA REG. NO.
2 x 2.5 gal
For the management of undesirable aquatic vegetation in slow moving or quiescent waters
KEY WEEDS CONTROLLED
(See product label for complete list)
Previous PostAquatic Resources and Education
Next PostClipper vs. Duckweed (hint: Clipper Wins)